Stellar Data Recovery/4. Working with the Software/4.4.恢复一个洛杉矶t Partition

4.4.恢复一个洛杉矶t Partition

---

Applicability: This topic on “恢复一个洛杉矶t Partition” is only for theFree,Professional,Premium, andTechnicianedition ofStellar Data Recovery.

---

Stellar Data Recoverysoftware allows you to search for lost or deleted volumes of a hard drive and recover data from it. Use this option to recover data from an accidentally deleted volume or from a volume lost due to corruption in the hard drive. This option searches and lists all the deleted and lost volumes in the hard disk along with the existing volumes.

To search a lost volume:

1. RunStellar Data Recovery.

2. FromSelect What To Recoverscreen, clickNext.

3. On theRecover Fromscreen, selectCan’t Find Volume.

4. ClickNext. The following screen is displayed:

5. In theSelect Disk to Search Lost Volumesection, all the hard drives connected to the system are listed with their details. From this section, choose a hard drive you want to scan for lost volumes and clickSearch. A scan for lost or deleted volumes will be performed in the selected disk or drive.

Note: If you are scanning a system drive havingCatalina, Mojave, High Sierra, orBig Surfor the first time usingStellar Data Recovery, you need to allow macOS to load an extension signed by“Stellar Data Recovery”. To know the procedure refer toRecover Data from System Disk with High Sierra and Above.

6. Any ‘lost volume’ detected by the software, is listed in the window as shown below:

7. You can select/ opt forDeep Scanif you want to perform a comprehensive scan of the selected volume.

8. From the list of found volumes, select the desired volume and clickScanto continue with the recovery process.

9. A screen appears showing the scan process. ClickStop, to stop the process.

10.扫描过程完成后,细节啊f the files and folder found are displayed in a dialog box as shown below:

11. ClickOK. For information on how to preview and recover the scanned data, seePreviewing Scan ResultsandSaving the Recovered Files.

You can save the scan results of a process to resume the recovery at a later stage. This helps you resume the recovery process without scanning the drive again. It is advisable to let the scan complete before saving the scan as you can recover data that is listed in the saved scan.

To save the scan information for Lost/Deleted volumes:

1. In the ‘Select Lost Volume to Recover Data‘ window, clickBackbutton or close the software. Or, clickicon and select theSave Scanoption.

2. You will be prompted to save the scan information.

3. ClickYes.

4. In the ‘Save scan information for Lost Volumes‘ dialog box, specify the location where you want to save the image file. Type the name of the image file in theSave Astext box. ClickSave.

To load the previously saved scan information for Lost Volumes:

This option is used to resume the recovery process from a saved scan information file.

1. RunStellar Data Recoverysoftware.

2. Clickicon and select theLoad Scanoption.

3. ALoad Scanwindow will appear which displays a list of saved scan information files existing in the system.

4. In case the file you desire is not in the list, clickAddbutton and select the desired file.

5. ClickOpen.

6. The file you added gets displayed in the load scan window. ClickRemovebutton if you want to remove the save scan file.

7. ClickResetbutton to reset the load scanned list.

8. ClickRecoverbutton. A ‘Searched Lost Partition History’ window is displayed.

9. A screen showing a list of the lost volumes is displayed. Select the required Lost Volume and clickScan.

Note: If you are scanning a system drive havingCatalina, Mojave, High Sierra, orBig Surfor the first time usingStellar Data Recovery, you need to allow macOS to load an extension signed by“Stellar Data Recovery”. To know the procedure refer toRecover Data from System Disk with High Sierra and Above.

10.扫描过程完成后,细节啊f the files and folders found are displayed.